Multi-functional Electric Drill for Orthopedic Joint Surgery MSLGK11

Product Features:

* Host maximum speed: 14000rmp, no limit speed, positive and negative selection, smooth operation

* The machine is muti-functional, quick to interface, can be connected to external drilling, sawing, reciprocating sawing, milling and other machine head

* Green battery, voltage: 14.4V, disinfection-free design

* Powerful host, Siamese closed after the back cover

* The whole machine can be sterilized

Multi-functional Electric Drill for Orthopedic Joint Surgery MSLGK11

2. Host advantage:

Behind is to adjust the positive and negative switch, CVT, you can machine high temperature disinfection, the other interfaces are the same high-temperature sterilization,

Battery sterilization channels can be sterilized for battery installation

Multi-functional Electric Drill for Orthopedic Joint Surgery MSLGK11

3. Optional:

1). Large torque drill interface: the maximum speed 250rmp torque, the whole process of surgery even more remarkable quality

(Also known as slow drilling, low speed, strength, suitable for orthopedic joint surgery)

2). Orthopedic Drill Interface: the maximum speed 1200rmp, with the function of self-stop through the skull, to ensure the safety of surgery, suitable for neurosurgery

(For neurosurgery, craniotomy for drilling surgery, the standard configuration of three self-stop bit, 6mm9mm12mm, after drilling automatically turn off the bit speed, surgery more secure)

3). Rapid drilling interface: the maximum speed 1200rmp, in the entire process of surgery even more remarkable quality

(Also known as fast drilling, suitable for general orthopedic surgery, upper and lower limb surgery, take the screw and other surgery, you can adjust the positive and negative)

4). Hollow drill interface: the maximum speed 1200rmp, the largest hollow diameter of 4.5mm, practical for Kirschner wire, intramedullary nail surgery

(This is not only a quick drill function, you can also Kirschner wire, intramedullary nail surgery, but also for trauma surgery)

5). Pendulum saw interface: swing frequency of 14,000 times / min, safe and fast saw removal mechanism

(This is for orthopedic joint replacement surgery, skill, strength enough)

6).Reciprocating saw interface: reciprocating amplitude of 2.5-5mm, stepless speed regulation, safe saw blade disassembly structure

(This is used for cardiothoracic surgery, resection of rib surgery and other protective cut function)

7). Skull milling interface: milling the maximum speed 30000rmp, stepless speed regulation, smooth operation, with milling cutter protection to ensure surgical safety

(This is also called craniotomy, for neurosurgery, craniotomy holes, with this cutter, milling brain surgery)

MSL TEAM picture 

Welcome to medicalequipment-msl.com.

If you have any demand in medical equipment, please feel free to contact cindy@medicalequipment-msl.com.