Foaming Soap Dispenser

1.Take the iquid box outward in the directionof the arrow
2.Place the iquid box upright
3.Fllwith foaming soap or regular lquid sapr(requires dilution)
4.Twist the Dispenser head clockwise to close it on

Specification:

Capacity: 330ml/120z
Material: ABS& PC
Weight: 420g
Protection Level:IPX3
Power Supply:3x AA Alkaline Battery (not included)
Dimensions: 4.3*4.3* 8.1 inches

Structural features:
1.Made of ABS and IPX3 waterproof material.
2.Sensor response speed is 0.2 seconds.
3.Working Temp :5~45 degrees, humidity is not more than 90% RH;
4.Four options of liquid flow : four gears via toggling switches
5.Low power design: Just 3uA needed when shutdown and the battery lasts longer;
6.Inductive fluid: making life easier and healthier wihtout contact
7.ABC+PC flame retardant: with bright and clear appearance, easy to clean

Note:
1. When the liquid flows out, the double indicator will flash for 10 seconds, reminder you need to wash your hands for 10 seconds.
2. When one light is flashing, it means battery low, please change new batteries

KINDLY NOTE:

1.Wipe the body with a damp cloth mop regularly, keep the surface of the unit clean.
2.If the liquid is too thick, please add water to ensure the dilution ration is 1:3 or 1:4
3.DO NOT use non-foam hand soap for replacement, so as not to cause machine failure
4.DO NOT shake the devices to avoid any serious damage
5.DO NOT wash the dispenser. Avoid direct sunlight to the infrared panel.andled
improperly, for example, water infiltration, falling, it is not covered by warranty.